Gator Grip Commercial 289 Series
GATOR GRIP is a single component, COMMERCIAL DUTY, LOW V.O.C LOW ODOR pigmented acrylic coating. Based on Nano Technology, GATOR GRIP demonstrates outstanding adhesion to a wide range of substrates including most coatings. GATOR GRIP incorporates a chemical curing mechanism that achieves fast initial water resistance and curing, and continues to harden and cure for 7-10 days after application to give a harder, tougher finish and more marking resistance than conventional water-based coatings and even most solvent-based sealers.
Gator Grip Epoxy 51 Series
Designed for industrial maintenance, and for the architectural coating market, WT-113 WATER EPOXY ENAMEL is a unique product from our laboratories. This product combines the durability of conventional solvent-based epoxy enamels, with the convenience and safety of water reducible coatings, with no sacrifice of drying time, toughness, adhesion, exterior durability, and other characteristics associated with quality solvent-based epoxy enamels.
Richards 4200 Series Deck Guard 100% Acrylic Patio & Deck Coating
Richard’s Deck Guard 100% Acrylic Patio & Deck Coating is ideal for use on pool decks, patios and walkways. Its smooth low sheen finish resists fading and chalking in full outdoor exposures. Maintains a long-lasting beautiful look. Formulated for use on interior or exterior previously painted, stained, and bare concrete and wood surfaces. Resists chipping, peeling, cracking and mildew. For interior and exterior use.
Richards Paver Sealer 51
Refresh, renew and protect paver walkways and driveways with Richard’s Paver Seal Clear Sealer/Finish.
This solvent-thinned 100% acrylic clear sealer and finish is designed for application to brick pavers, concrete floors, and other cementitious type floor surfaces. Provides a durable finish that penetrates and seals the surface, while providing excellent resistance to surface powdering, foot and vehicle traffic, oil, grease and other common stains.
This non-yellowing clear finish enhances the color of the surface, and resists the effects of UV
light and weathering. Applies easily by brush, roller or low-pressure spray.
For exterior use only.
Rust-oleum Hard Surface Primer
Hard Surface Primer is a two component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult to coat, or marginally prepared substrates. Substrates include; hard-troweled concrete, aluminum and various types of tiles. Hard Surface Primer can be top coated with most types of floor coating technologies including acrylic, epoxies and polyurethanes.
Seal Krete® High Performance Epoxy-Shell™ 1000 EPL
Seal Krete® HP Vapor Shell
SEAL-KRETE Vapor-Shell is a low viscosity clear one-coat, 100% Solids Epoxy, membrane-forming, moisture vapor control system formulated to bond to concrete with relative humidity (RH). Seal-Krete Vapor-Shell is designed to reduce moisture vapor emission levels up to 25lbs./1000 sq. ft./24 hours to 3lbs./1000 sq. ft./24 hours or less. With a low permeance of 0.05 perms, Seal-Krete Vapor-Shell is an excellent moisture blocker for virtually all types of flooring, including low permeance flooring. Save money, by reducing application time, labor, and product cost.
Seal Krete® Poly-Shell 7000
It dries quickly and provides unparalleled rapid return-to-service. It is extremely resistant to heat (temps up to 350 F), UV rays, and a variety of harsh chemicals, including salt, oil, and gasoline. Poly-Shell is also flexible and allows for natural concrete movement without cracking or peeling, making this system ideal for either indoor or outdoor applications.
Seal Krete® Poly-Shell 8000
80% Solids Polyaspartic Floor Coating
Seal-Krete Poly-Shell™ 8000 utilizes the latest development in Polyaspartic coating technology and is the most durable coating available. It dries quickly and provides unparalleled rapid return to service. It is extremely resistant to heat (temps up to 350 F), UV rays, and a variety of harsh chemicals, including salt, oil, and gasoline. Poly-Shell is also flexible and allows for natural concrete movement without cracking or peeling, making this system ideal for either indoor or outdoor applications.
Seal Krete® HP Durashell
Dura-Shell is a durable two-part water-based aliphatic urethane that provides both heat and chemical resistance and excellent protection against UV rays.
Dura-Shell is formulated with a high tolerance for moisture and excellent bonding strength, making it ideal for indoor / outdoor areas and light industrial projects.